Balsa Core Deck Repair. Replacing Damaged Balsa Core Epoxyworks It is there to increase the thickness of the hull, while trying to keep the weight of the boat to a minimum If you try doing this from the bottom, getting a good bond between the balsa and the upper laminate layer will be difficult, since gravity will then to cause the balsa to pull away from the upper laminate, and that will leave you with voids, weakening the repair considerably
Replacing Damaged Balsa Core Epoxyworks from www.epoxyworks.com
Bruce replaced the damaged balsa core on his 1981 Pearson Flyer TRIPLE THREAT. But end grained balsa is a highly processed ultra light.
Replacing Damaged Balsa Core Epoxyworks
The lower section of fiberglass was cleaned using a Dremel tool and scrapers to remove all of the balsa strip insides of anything important, vests, gear, etc. Pre-scored Corecell is not floppy enough to conform to curved decks
Balsa Core Hull Repair on Idle Queen YouTube. Apply thickened epoxy to the core with a grooved spreader. For a cored deck to function as designed, the two laminate skins must.
Aft Deck Balsa Core Repair How To / Not To. The statement: "The core became damp, bacteria moved in, and the balsa decayed to the consistency of garden mulch." is misleading because 1) the damage is caused by fungi, not bacteria, and 2) the fungal spores have. strip insides of anything important, vests, gear, etc.